Product introduction

Type 416HT Stainless Steel is a stainless steel which is martensitic and has been hardened by heat treatment to higher strength and hardness levels. It has much better machining properties than the austenitic grades, but lower corrosion resistance.It has the highest machinability of any stainless steel at about 85% of that of a free-machining carbon steel. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant. Although Alloy 416HT and other martensitic stainless steels are not as resistant as austenitic or ferritic stainless, it still demonstrates good corrosion and oxidation resistance plus high strength in the hardened and tempered condition. Alloy 416HT  is easily machined, is always magnetic, and has low frictional properties that reduce galling and seizing.

Technical data

Applications:

Alloy 416HT is generally used for parts that are extensively machined and require the corrosion resistance of a 13% chromium stainless steel. Applications that generally use Alloy 416 include:

• Electrical motors
• Nuts and bolts
• Pumps
• Valves
• Automatic screw machine parts
• Washing machine components
• Studs
• Gears

Standards:

• ASTM/ASME: UNS S41600
• EURONORM: FeMi35Cr20Cu4Mo2
• DIN: 2.4660

Corrosion Resistance:

• Demonstrates corrosion resistance to natural food acids, waste products, basic and neutral salts, natural waters, and most atmospheric conditions
• Less resistant that the austenitic grades of stainless steel and also the 17% chromium ferritic alloys
• High sulfur, free-machining grades like Alloy 416HT are unsuitable for marine or other chloride exposure
• Maximum corrosion resistance is achieved in the hardened condition, with a smooth surface finish

Heat Resistance

• Fair resistance to scaling in intermittent service up to 1400^oF (760^oC) and up to 1247^oF (675^oC) in continuous service
• Not recommended for use in temperatures above the relevant tempering temperature if maintenance of mechanical properties is important

Welding Characteristics

• Poor weldability
• If welding is necessary use Alloy 410 low hydrogen electrodes
• Pre-heat to 392 to 572°F (200-300°C)
• Follow immediately with annealing or re-hardening, or a stress relief at  1202 to 1247°F (650 to 675°C) 

Machinability

• Has outstanding machinability
• Best machinability is in the sub-critical annealed condition

Chemical Properties:

Mechanical Properties:

Physical Properties:

FAQ
Q:Will you delivery the goods on time?
A:Yes,we promise to provide best quality products and delivery on time.Honesty is our company's tenet.
Q:Do you provide samples?is it free or extra?
A:The sample could can provide for customer with free,but the courier freight will be covered by customer account.
Q:Do you accept the third party inspection?
A:Yes absolutely we accept.
Q:What are your main products?
A:Carbon steel,alloy steel,stainless steel plate/coil,pipe and fittings,sections etc.
Q：Can you accept the order of customzied?
A：Yes,we assure.