ASTM A514 high strength steel plate

Classification :

ASTM A514 steel plate is a steel plate material known for its high yield strength, weldability, and toughness, even at low temperatures. ASTM A514 is a low carbon quenched and tempered alloy steel that is a low-cost, high performing material for structural use and high wear machine applications. A514 steel plate meets the ASTM International standard A514. This steel plate has a yield strength of 100,000 psi (100 ksi or approximately 700 MPa).

Bella@zglcmetal.com

RELATED PRODUCTS

ONLINE MESSAGE

Keywords:

Hight Strength Low Alloy Steel

Product introduction

ASTM A514 Alloy Steel Plate

The A514 plate steels are a group of quenched and tempered alloys with many attractive advantages and characteristics. It has a minimum tensile strength of 100 ksi (689 MPa) and at least 110 ksi (758 MPa) ultimate. Plates from 2.5 inches to 6.0 inches have a specified tensile strength of 90 ksi (621 MPa) and 100 - 130 ksi (689 - 896 MPa) ultimate. A514 plate also provides good weldability, and toughness at low atmospheric temperatures. The ASTM A514 group is designed for a wide range of structural uses as well as machinery and equipment. However, the primary use is as a structural steel in building construction. This group of steel, which also includes A517, alloy steel combine optimum strength, toughness, corrosion resistance, impact-abrasion resistance, and long-term economy.

A514 steel plate
ASTM A514 is most commonly used as structural steel in cranes and large heavy-load machines.
Overview:
Commonly used as structural steel in cranes or large heavy-load machines, A514 offers high strength with weldable, machinable properties.
Also referred to as T-1 steel.
Quenched and tempered for increased strength.
Available in eight grades: B, S, H, Q, E, F, A and P.
Available in heavy plate thicknesses (3-inches or greater).
Suitable in lower temperatures. Charpy impact test results for specific climates available.

Available Sizes
stocks the following standard sizes, but other sizes may be available for special orders.

GRADE	THICKNESS	WIDTH	LENGTH
GRADE B	3/16" – 1 1/4"	48" – 120"	UP TO 480"
GRADE S	3/16" – 2 1/2"	48" – 120"	UP TO 480"
GRADE H	3/16" – 2"	48" – 120"	UP TO 480"
GRADE Q	3/16" – 8"	48" – 120"	UP TO 480"
GRADE E	3/16" – 6"	48" – 120"	UP TO 480"
GRADE F	3/16" – 2 1/2"	48" – 120"	UP TO 480"
GRADE A	INQUIRE	INQUIRE	INQUIRE
GRADE P	INQUIRE	INQUIRE	INQUIRE

MATERIAL PROPERTIES
The following material properties are ASTM specifications and will be confirmed on the Mill Test Report.

GRADE	YIELD POINT (KSI)	TENSILE STRENGTH (KSI)	MIN. 8” ELONGATION %
3/4" OR LESS THICKNESS	100	110-130	18
GREATER THAN 3/4" TO 2.5" THICKNESS	100	110-130	18
GREATER THAN 2.5" TO 6" THICKNESS	90	100-130	16

Technical data

CHEMICAL COMPOSITION
The following composition properties are ASTM specifications for A514 steel grades.

Grade B
CARBON	0.12-0.21%
MANGANESE	0.70-1.00%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.20-0.35%
CHROMIUM	0.40-0.65%
MOLYBDENUM	0.15-0.25%
VANADIUM	0.03-0.08%
TITANIUM	0.01-0.10%
BORON	0.0005-0.005%

Grade S
CARBON	0.11-0.21%
MANGANESE	1.10-1.50%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.020%
SILICON	0.15-0.45%
MOLYBDENUM	0.10-0.60%
VANADIUM	0.06%
BORON	0.001-0.005%
COLUMBIUM MAX	0.06%

Grade H
CARBON	0.12-0.21%
MANGANESE	0.95-1.30%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.20-0.35%
NICKEL	0.30-0.70%
CHROMIUM	0.40-0.65%
MOLYBDENUM	0.20-0.30%
VANADIUM	0.03-0.08%
BORON	0.0005-0.005%

Grade Q
CARBON	0.14-0.21%
MANGANESE	0.95-1.30%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.15-0.35%
NICKEL	1.20-1.50%
CHROMIUM	1.00-1.50%
MOLYBDENUM	0.40-0.60%
VANADIUM	0.03-0.08%

Grade E
CARBON	0.12-0.20%
MANGANESE	0.40-0.70%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.20-0.40%
CHROMIUM	1.40-20%
MOLYBDENUM	0.40-0.60%
TITANIUM	0.01-0.10%
BORON	0.001-0.005%

CARBON	0.10-0.20%
MANGANESE	0.60-1.00%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.15-0.35%
NICKEL	0.70-1.00%
CHROMIUM	0.40-0.65%
MOLYBDENUM	0.40-0.60%
VANADIUM	0.03-0.08%
COPPER	0.15-0.50%
BORON	0.0005-0.006%

Grade A
CARBON	0.15-0.21%
MANGANESE	0.80-1.10%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.40-0.80%
CHROMIUM	0.50-0.80%
MOLYBDENUM	0.18-0.28%
ZIRCONIUM	0.05-0.15%
BORON	0.0025% MAX

Grade P
CARBON	0.12-0.21%
MANGANESE	0.95-1.30%
PHOSPHORUS MAX	0.030%
SULFUR MAX	0.030%
SILICON	0.20-0.35%
NICKLE	1.20-1.50%
CHROMIUM	0.85-1.20%
MOLYBDENUM	0.45-0.60%
BORON	0.001-0.005% MAX

warehouse storage

The annual output of the factory is 400,000 tons, and the current inventory is more than 100,000 tons, which can greatly save the purchasing time of customers and ensure the production cycle and product quality of customers. We are a quality partner for domestic and foreign customers. At present, there are 14 steel production lines for processing, bending, coating, heat treatment, cutting, drilling, chamfering, conditioning, surface treatment and 13 sets of processing equipment.

Packing and shipping

Our main products are: carbon steel plate, carbon steel pipe, carbon steel coil, stainless steel plate, stainless steel coil, stainless steel profile, galvanized plate, galvanized coil, color coated steel coil, ppgi/ppgl and a wide range of high quality steel products.

Customer visit

Li Cheng (Shandong) Metal Materials Co., LTD. has the right to import and export, and its products are exported to more than 20 countries in Asia, Africa, Europe, North America and other regions. Complete processing equipment, perfect quality assurance system, well received by customers.We are willing to first-class technology, first-class equipment, first-class service wholeheartedly and friends from all walks of life sincere cooperation!

Cooperation Case

Applicable to construction, petroleum, chemical, electric power, metallurgy, urban gas, heat pipe network, Bridges, railways, vehicles, ships and other industrial fields and construction, infrastructure and other engineering fields. Complete testing equipment, strong technical force, can implement GB, ASTM, JIS, DIN and other standards.

HONOR

Factory

FACTORY

Hight Strength Low Alloy Steel