20CrNiMo(8620H) hot rolled steel round bars

Classification :

GB 20CrNiMo Alloy steel, we can supply the round bar, steel flat bar, plate, hexagonal steel bar and steel square block. GB 20CrNiMo steel Round bar can be sawn to your required lengths as one offs or multiple cut pieces. 20CrNiMo alloy steel Rectangular pieces can be sawn from flat bar or plate to your specific sizes. Ground tool steel bar can be supplied, providing a quality precision finished bar to tight tolerances.

Bella@zglcmetal.com

RELATED PRODUCTS

ONLINE MESSAGE

Keywords:

Steel Round Bars

Product introduction

GB 20CrNiMo alloy Steel is a high quality Quenched and Tempered Alloy Structural steel, and it belong to the high quality low carbon, low chromium, molybdenum, nickel case hardening steel. Oil Quenched & Tempered Hardenss is 28-34 HRC. GB 20CrNiMo steel Annealing delivery hardenss less than 250HB.

GB 20CrNiMo Alloy structural steel properties is a Nickel chromium molybdenum alloy steel specification. 20CrNiMo With a lower carbon content range, So GB 20CrNiMo steel have good weldability.

Chemical and Mechanical

Chemical composition

C(％)	0.17～0.23	Si(％)	0.17～0.37	Mn(％)	0.60～0.95	P(％)	≤0.035
S(％)	≤0.035	Cr(％)	0.40～0.70	Mo(％)	0.20～0.30	Ni(％)	0.35～0.75

Mechanical Properties

The mechanical properties of annealed GB 20CrNiMo alloy steel are outlined in the table below

Tensile	Yield	Bulk modulus	Shear modulus	Poisson’s ratio	Izod Impact
KSI	KSI	KSI	KSI		ft.lb
76900	55800	20300	11600	0.27-0.30	84.8

Equivalent Of 5160 alloy Spring Steel

USA	Germany	China	Japan	France	England	Italy	Poland	ISO	Austria	Sweden	Spain
ASTM/AISI/UNS/SAE	DIN,WNr	GB	GB	AFNOR	BS	UNI	PN	ISO	ONORM	SS	UNE
8620 / G86200	21NiCrMo2/ 1.6523	20CrNiMo	SNCM220	20NCD2	805M20			20NiCrMo2

Heat treatment Related

Annealing of 20CrNiMo Alloy structural steel

Slowly heated to 850 ℃ and allow enough times, let the steel to be thoroughly heated, Then cool slowly in the furnace. The 20CrNiMo alloy steel will get MAX 250 HB （Brinell hardness）.

Hardening of 20CrNiMo Alloy structural steel

Heated slowly to 880-920°C, Then after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.

Mechanical Properties

The mechanical properties of annealed GB 20CrNiMo alloy steel are outlined in the table below

Tensile	Yield	Bulk modulus	Shear modulus	Poisson’s ratio	Izod Impact
KSI	KSI	KSI	KSI		ft.lb
76900	55800	20300	11600	0.27-0.30	84.8

Applications

GB 20CrNiMo steel is widely used for a variety of applications in the used in the automotive and engineering industries for toolholders and other such components. Typical applications such as valve bodies, pumps and fittings, Shaft, the high load of wheel, bolts, double-headed bolts, gears, etc

Regular size and Tolerance

Steel round bar: Diameter Ø 5mm – 3000mm

Steel plate: Thickness 5mm – 3000mm x Width 100mm – 3500mm

Steel Hexagonal bar: Hex 5mm – 105mm

Others 20CrNiMo have not specified size, so please contact our experienced sales team.

Processing

GB 20CrNiMo alloy steel round bar and flat sections can be cut to your required sizes. Furthermore, 20CrNiMo alloy steel ground bar can also be supplied, providing a high quality tool steel precision ground tool steel bar to your required tolerances. Moreover, GB 20CrNiMo steel is also available as Ground Flat Stock / Gauge Plate, in standard and nonstandard sizes.

warehouse storage

The annual output of the factory is 400,000 tons, and the current inventory is more than 100,000 tons, which can greatly save the purchasing time of customers and ensure the production cycle and product quality of customers. We are a quality partner for domestic and foreign customers. At present, there are 14 steel production lines for processing, bending, coating, heat treatment, cutting, drilling, chamfering, conditioning, surface treatment and 13 sets of processing equipment.

Packing and shipping

Our main products are: carbon steel plate, carbon steel pipe, carbon steel coil, stainless steel plate, stainless steel coil, stainless steel profile, galvanized plate, galvanized coil, color coated steel coil, ppgi/ppgl and a wide range of high quality steel products.

Customer visit

Li Cheng (Shandong) Metal Materials Co., LTD. has the right to import and export, and its products are exported to more than 20 countries in Asia, Africa, Europe, North America and other regions. Complete processing equipment, perfect quality assurance system, well received by customers.We are willing to first-class technology, first-class equipment, first-class service wholeheartedly and friends from all walks of life sincere cooperation!

Cooperation Case

Applicable to construction, petroleum, chemical, electric power, metallurgy, urban gas, heat pipe network, Bridges, railways, vehicles, ships and other industrial fields and construction, infrastructure and other engineering fields. Complete testing equipment, strong technical force, can implement GB, ASTM, JIS, DIN and other standards.

HONOR

Factory

FACTORY

Steel Round Bars