Description

EN10025 S890QL Extra High Strength Steel Plate

S890QL is an extra high strength steel to EN10025-6:2004 and the steel number is 1.8983. S890QL has a minimum yield strength of 890Mpa in quenched and tempered conditions, with it’s low temperature of -40 ºC, this steel grade perform good durability in extreme working environments.

S890QL extra high strength structural steel plate is an ideal leaner weight for your project as it has 224% more higher strength than S275JR structural steel, it is relatively easy welding and fabricate. It has becoming more and more popular in crane, oil and gas, mining, earthmoving, agricultural, trailers, theme park, bridge building, extreme weather search and rescue industries and modern super structural design where light weight and leaner thickness steel plate with increase payload capacity. Today, beautiful high-rice buildings and super architectural design art has became reality because of the discovery of S890QL steel plate.

Other steel product for 890Mpa extra high yield strength such as seamless tube in rectangular, square, circular, elliptical, half-elliptical, flat-oval, octagonal, hexagonal and triangular are available in Beverly Steel Malaysia, please contact our sales team for further information.

Physical properties

S890QL Grade Designation

• S = Structural Steel

• 890 = minimum yield strength (MPa)

• Q = Quenching & Tempering

• L = Low notch toughness testing temperatures

Condition of Delivery

Water quenched and tempered.

S890QL Chemical Composition

* There shall be at least 0.015% of a grain-refining element present. Aluminium is also one of these elements. The 0.015% applies to soluble aluminium, this value regarded as attained if the  gasteizcup.comtotal aluminium content is at least 0.018%.

* Please note :The manufacturer reserves the right to change the chemical composition.

CEV - Carbon Equivalent Value

CEV = C + Mn/6 + (Cr+Mo+V)/5+(Cu+Ni)/15
 

S890QL Quenched and Tempered Structural Steel

S890QL Mechanical Properties

S890QL V Notch Impact Test

Processing of S890QL High Strength Steel Plate

Cold Forming

S690QL1 steel plate is suitable for cold-forming adhering to a bending or folding radius > 4 times steel plate thickness longitudinal and > 3 times transverse to rolling direction. A subsequent stress relief annealing is possible up to a temperature of 580 ºC (degree C).