ASTM A53 Carbon Steel Pipe for Building Structure

Classification :

ASTM A53 grade b Pipe can be welded seam or seamless depending on how
it is specificed for purchase.
It is a general steel pipe spec and covers galvanized pipe as well as black pipe

Bella@zglcmetal.com

RELATED PRODUCTS

ONLINE MESSAGE

Keywords:

Seamless Steel Pipe

Product introduction

ASTM A53 Galvanized Steel Pipe ASTM A53 Gavanized Steel Pipe Greenhouse Steel Galvanized Pipe

ASTM A53 standard refers to welded black and hot-dipped galvanized steel pipe.

SPECIFICATION

Standards	ASTM, ASME and API
Size	1/2” NB to 36” NB
Thickness	3-12mm
Schedules	SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules
Tolerance	Cold drawn pipe: +/-0.1mmCold rolled pipe: +/-0.05mm
Craft	Cold rolled and Cold drawn
Type	Seamless / ERW / Welded / Fabricated
Form	Round, Hydraulic Etc
Length	Min 3 Meters, Max18 Meters, or according to customer’s requirement
End	Plain End, Beveled End, Treaded
Specialized in	Large Diameter ASTM A53 Grade B Pipe
Additional Testing	NACE MR0175, NACE TM0177, NACE TM0284, HIC TEST, SSC TEST, H2 SERVICE, IBR, etc.

ASTM A53 PIPE TYPES

ASTM A 53 covers seamless and welded steel pipe with nominal wall thickness. The surface condition is usually black and hot-dipped galvanized. ASTM A 53 is produced mainly for pressure and mechanical applications, and is also used for transport of steam, water, gas line pipes.

CHARACTERISTICS

Designed for coiling, bending and flanging, A53 carbon steel pipe is suitable for welding. The grades denote certain chemical and mechanical properties and should be noted in selection.

SIZES

½" – 12" some limitations dependent upon grade. Sizes up to 26" OD are available on limited basis.

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless. This specification covers seamless and welded black and hot-dipped galvanized steel pipe.

Application:

For mechanical and pressure use, and also for transporting steam, water, gas and etc.

Mill test certificates will be issued according to EN10204/3.1B .

The tubing shall undergo a seamless or welding process. Tension, bend, and flattening tests shall be performed to make sure that it must adhere to the mechanical properties of the standard.

Technical data

Chemical Composition

Maximum values in %	Type S (Seamless)		Type E (ERW)		Type F (Furnace Weld)
A53 Pipe Grade–>	Grade A	Grade B	Grade A	Grade B	Grade A
Carbon	0.25	0.3	0.25	0.3	0.3
Manganese	0.95	1.2	0.95	1.2	1.2
Phosphorous	0.05	0.05	0.05	0.05	0.05
Sulfur	0.045	0.045	0.045	0.045	0.045
Copper	0.4	0.4	0.4	0.4	0.4
Nickel	0.4	0.4	0.4	0.4	0.4
Chromium	0.4	0.4	0.4	0.4	0.4
Molybdenum	0.15	0.15	0.15	0.15	0.15
Vanadium	0.08	0.08	0.08	0.08	0.08

Mechanical Properties

Seamless and ERW	A53 Grade A	A53 Grade B
Tensile Strength, min, psi	48,000	60,000
Yield Strength	30,000	35,000

Pressure Rating

Maximum Allowable Pressure (psi)
NPS	Outside Diameter	Schedule
(in)	(in)	10	20	30	STD	40	60	XS	80	100	120	140	160	XXS
1/4	0.54				7985	7985		10798	10798
3/8	0.675				6606	6606		9147	9147
1/2	0.84				6358	6358		8575	8575				10908	17150
3/4	1.05				5273	5273		7187	7187				10220	14373
1	1.315				4956	4956		6670	6670				9316	13340
1 1/4	1.66				4133	4133		5638	5638				7380	11276
1 1/2	1.9				3739	3739		5158	5158				7247	10316
2	2.375				3177	3177		4498	4498				7097	8995
2 1/2	2.875				3460	3460		4704	4704				6391	9408
3	3.5				3024	3024		4200	4200				6132	8400
3 1/2	4				2769	2769		3896	3896
4	4.5				2581	2581		3670	3670		4769		5782	7339
5	5.563				2273	2273		3303	3303		4404		5505	6606
6	6.625				2071	2071		3195	3195		4157		5318	6390
8	8.625		1420	1574	1829	1829	2307	2841	2841	3375	4085	4613	5147	4971
10	10.75		1140	1399	1664	1664	2279	2279	2708	3277	3847	4558	5128	4558
12	12.75		961	1268	1441	1560	2160	1922	2644	3244	3843	4324	5042	3843
14	14	875	1092	1313	1313	1533	2079	1750	2625	3283	3829	4375	4921
16	16	766	956	1148	1148	1531	2009	1531	2585	3157	3733	4404	4882
18	18	681	849	1192	1021	1530	2042	1361	2553	3147	3743	4252	4848
20	20	613	919	1225	919	1455	1989	1225	2526	3138	3675	4288	4824
22	22	557	835	1114	835		1949	1114	2506	3063	3619	4176	4733
24	24	510	766	1147	766	1405	1978	1021	2489	3126	3700	4210	4786
30	30	510	817	1021	613			817
32	32	478	766	957	574	1054
34	34	450	721	901	540	992
36	36	425	681	851	510	1021
42	42		583	729	438	875

warehouse storage

The annual output of the factory is 400,000 tons, and the current inventory is more than 100,000 tons, which can greatly save the purchasing time of customers and ensure the production cycle and product quality of customers. We are a quality partner for domestic and foreign customers. At present, there are 14 steel production lines for processing, bending, coating, heat treatment, cutting, drilling, chamfering, conditioning, surface treatment and 13 sets of processing equipment.

Packing and shipping

Our main products are: carbon steel plate, carbon steel pipe, carbon steel coil, stainless steel plate, stainless steel coil, stainless steel profile, galvanized plate, galvanized coil, color coated steel coil, ppgi/ppgl and a wide range of high quality steel products.

Customer visit

Li Cheng (Shandong) Metal Materials Co., LTD. has the right to import and export, and its products are exported to more than 20 countries in Asia, Africa, Europe, North America and other regions. Complete processing equipment, perfect quality assurance system, well received by customers.We are willing to first-class technology, first-class equipment, first-class service wholeheartedly and friends from all walks of life sincere cooperation!

Cooperation Case

Applicable to construction, petroleum, chemical, electric power, metallurgy, urban gas, heat pipe network, Bridges, railways, vehicles, ships and other industrial fields and construction, infrastructure and other engineering fields. Complete testing equipment, strong technical force, can implement GB, ASTM, JIS, DIN and other standards.

HONOR

Factory

FACTORY

Seamless Steel Pipe